BCMI-SK BOLERO video input for parking camera, Škoda

Video input to connect a aftermarket parking camera, for Škoda Octavia, Superb (08-), Yeti (09-) with oem headunit with 26PIN connector.

Features:

• for NTSC input signal cameras only
• automatic switching (requires the oem unit encoding)

Suitable for cars with OEM navi RNS315 / RCD510 / RNS510

• ŠKODA Fabia II. (2009-2013)
• ŠKODA Roomster (2008-2013)
• ŠKODA Octavia II. (2008-2013)
• ŠKODA Superb II. (2008-2013)
• ŠKODA Yeti (2009-2013)

Designed for original radios with a 26 PIN connector

Note. After installation, it is necessary to enable the parking camera via vehicle diagnostics (via VCDS, VagCom, ...). If there is oem TV-Tuner installed, this must be disconnected and not used before the installation of theis module.

• RNS510/810: If coding is done by diagnosis PC, code rear-view camera to “LOW" in controller 56 radio (not in controller 19 - CAN gateway). After coding, the vehicleneeds to be locked to reach sleep mode.
• RNS315: If coding is done by diagnosis PC, code to rear-view camera in controller 37 navigation (not in controller 19 - CAN gateway). After coding the vehicles needs to be locked to reach sleep mode.
• Vehicles with OPS (optical parking system): If coding is done by diagnosis PC, code to rear-view camera in controller 10 park assistant 2 (not in controller 19 - CAN gateway). After coding the vehicles needs to be locked to reach sleep mode.