EN 
Pre SK zákazníkov 
Pre CZ zákazníkov 
Vehicles
USB charging
Install the required number of cigarette lighter sockets or USB chargers in your vehicle, in the ideal location, with the right type and sufficient charging current. You will no longer have to run cables across the vehicle, use adapters, ask someone to “unplug,” or wait a long time for charging. Add a cigarette lighter socket to the trunk or USB chargers near the rear seats. You can conveniently power your mobile phones, monitors, or even a compressor or refrigerator whenever you need it.
MY1084-1H Cigarette lighter socket, mounting panel
CL socket waterproof, integrated in the mounting panel.
MY1083 Voltmeter, 6-30V, red LED
The on-board voltmeter is used to prevent battery failures and to check the charging of a vehicle with an on-board voltage of 12/24V. The voltmeter gives you ...
MY1106-1H Charger USB-A 2x with cover, mounting panel
Charger USB-A 2x, 5V, 2.1A, waterresistant, integrated in the mounting panel.
MY1118 Charger USB-A 2x with cover for motorcycles
Charger USB-A 2x, 5V, 2.1A, waterresistant, with a holder for mounting on handlebars or a circular frame. Ideal for ...
MYP001 Panel for built-in charger, with one hole
Single hole Housing for the thread housing products (chargers built-in for panel)
MY1121 Extension cable AUX/USB 100cm
AUX/USB extension cable 1 m long, with a socket for fitting into a hole with a diameter of 27 mm.
MY1218 Charger USB-A & USB-C built-in, 5V, 4.2A
Charger USB-A & USB-C built into the panel, 5V, 4.2A with dust and moisture cover.
MY1298 Charger USB-A & USB-C built-in, QC3.0, PD 3.0
Fast Charger USB-A & USB-C (Qualcomm Quick Charge 3.0) built into the panel, with dust and moisture cover.
MY1248 Charger USB-A 2x, built-in, 5V, 4.2A
Charger USB-A 2x built into the panel, 5V, 4.2A with a cover against dust and moisture.
MY1236 Charger USB-A 2x, built-in, 5V, 4.2A
Surface mount charger USB-A 2x, with rectangular panel, built-in, 5V, 4.2A with dust and moisture cover.
MY1288 Charger USB-A & USB-C built-in, 5V, 4.2A
Surface mount charger USB-A & USB-C, with rectangular panel, built-in, 5V, 4.2A with dust and moisture cover.
MY1084 CL Socket built-in, 12-24V, 20A
CL socket 12-24V with dust and moisture cover, for installation in the panel, used to connect various electrical devices.
MY1082 Voltmeter, 6-30V, blue LED
The on-board voltmeter is used to prevent battery failures and to check the charging of a vehicle with an on-board voltage of 12/24V. The voltmeter gives you ...
Steelmate UC63M Charger USB-A & USB-C, 63W
Car charger for cigarette lighter USB-C + USB-A (5V/3A).
MYP002 Panel for built-in charger, with single hole
Front panel - Single hole, designed for permanent installation of USB charger, or CL socket in the dashboard body. The ...
Last visited
Steelmate PTS810V10 BTI parking assistant
Parking assistant STEELMATE with 8 black flush sensors 16mm, with only one control unit, designed for installation in the front and rear bumper, with V10 LCD ...
GSWF SATIN LATE PPF paint protection film, satin, beige
PPF film SATIN LATE aesthetically transforms the vehicle’s paintwork into a satin beige finish while providing ...
