Blind spot detection

The blind spot is an area that is not covered by exterior or interior mirrors, and also the responsible driver can overlook the obstacle or the person in it. All vehicles have a blind spot, but its size varies depending on the vehicle design and the rear-view mirrors installed.

The installed blind spot monitoring system will improve the driver's (LKW, passenger car, van) view of vulnerable groups of people along the vehicle (on the right or left side) at the time the vehicle starts and a turn-off maneuver begins, or alerts him to the vehicle which is already in the lane in which the driver is about to enter.

Still more areas / urban agglomerations require an installed DVS safety system as a condition of permission for the entry of trucks, in order to protect the lives of cyclists, motorcyclists, pedestrians ...

The safety equipment needed to install, to apply for a permit as a zero star reted vehicle, for LONDON city (England):
• fully operational camera monitoring system
• sensor system with driver alerts
• audible vehicle manoeuvring warning for left turns (or right turns if the vehicle is left-hand drive)
• warning stickers
• side-underrun protection
• class V and VI mirrors

11 products

TFT7HD2 Monitor 7" AHD 2ch 2split 4PIN 12/24V

AHD Monitor for vehicles with a diagonal of 7", up to two cameras to connect, allows simultaneous multiple display of ...

In stock
TFT7HD2

SS-4200W Blind spot monitoring for trucks DVS

DVS Blind Spot Monitoring System for Trucks detects an obstacle using 4 ultrasonic sensors. It is installed on the side of the truck. The coverage range is ...

In stock
SS-4200W

SBS-1 Blind spot monitoring for passenger cars

The STEELMATE Blind Spot Detection System reminds the driver that he or she has already been overtaken by another ...

In stock
SBS-1

DVS STICKER Sticker ANGLES MORTS, 3pcs

Warning stickers ANGLES MORTS - Blind angle, designed for trucks, 3pcs (use: France, England).

In stock
DVS STICKER

TS-001ECU Side indicators module for Blind spot detection

The Module is designed to turn the side detection system on automatically, while the side signal light is turned on (to ...

In stock
TS-001ECU

LS-60-A Speed module for Blind spot detection

The Module is designed to turn the side detection system on automatically, depending on the actual speed of the vehicle. The side detection is thus active at low ...

In stock
LS-60-A

TFT7HD4 Monitor 7" AHD 4ch 4split 4PIN 12/24V

AHD Monitor 7" for vehicles, supporting up to four cameras to connect, simultaneous multiple view, M12 4PIN screw plugs, 1024x600 resolution, for 12/24V on-board ...

In stock
TFT7HD4

SW IMP Pulse switch with LED backlight, green, 19mm

Pulse switch, green backlight, with cable and connector, 19mm. The package includes a 1.5m cable with a 4-pin connector

In stock
SW IMP

GR-03 LOW Audible signalisation "WhiteSound"

Audible reversing alarm with low tone sound, 12-48V, 100 dB. Easy installation, mounting 2 screws and connecting 2 wires (+/-). Dimensions 102 x 69 x 40 mm. ...

In stock
GR-03 LOW

CAM5HD Camera mobile to side AHD, 4PIN, auto IR

AHD Camera 720p for vehicles, with auto IR, to display on AHD monitor, powered from monitor via M12 4PIN screw plugs, ...

In stock
CAM5HD

M12 5m Camera cable 4PIN female-male

Cable enables the camera / monitor connection, transmits signal to monitor and power to camera, 5 meters lenght, screw connectors M12 4PIN male and female.

In stock
M12 5m