Thinkware BAB50 HW Power supply iVolt 4.500 mAh
Universal power source intended for dashcams mainly, with 4.500 mAh battery built-in. It allows to use the whole potential of a camera's parking mode and protects the vehicle's battery. The power source battery is charged automatically when the vehicle ignition is switched on. Time to full charge is 45 min / 1 hour. The power source is designed for a 3-wire car cameras. (BAB50 HW withstands to supply F200PRO 30 hours in parking mode - motion detection).
Discontinued
Universal power source intended for dashcams mainly, with 4.500 mAh battery built-in. It allows to use the whole potential of a camera's parking mode and protects the vehicle's battery. The power source battery is charged automatically when the vehicle ignition is switched on. Time to full charge is 45 min / 1 hour. The power source is designed for a 3-wire car cameras. (BAB50 HW withstands to supply F200PRO 30 hours in parking mode - motion detection).
PARAMETERS:
- input voltage: 12V - 15.5V (9A Max.)
- output voltage / current: 11.5V - 14.4V
- charging voltage / current:
- LOW mode: 14.4V (5A)
- HIGH mode: 14.4V (7A)
- charging time
- LOW mode: about 1 hour (5A)
- HIGH mode: about 45 minutes (7A)
- operating time: about 16 hours (with 3.5 W consumption)
- battery type: LiFePo4 (lithium iron phosphate)
- battery capacity: 12.8V / 4.500 mAh / 57.6 Wh
- input power type: ACC power from ignition
- mode change: when the input voltage appears
- dimensions: 17 x 4 x 13 cm (w x h x d)
Parameters
Weight | 1.25 kg |
---|
Need help?
Our technical support staff is ready to help and assist our customers. On the phone, by email or instant messaging on working days 8am-4.30pm